HMAS Echuca (J252/M252), named for the town of Echuca, Victoria, was one of 60 Bathurst-class corvettes constructed during World War II, and one of 36 initially manned and commissioned by the Royal Australian Navy (RAN).[1]
Design and construction[edit]
Main article: Bathurst-class corvette
In 1938, the Australian Commonwealth Naval Board (ACNB) identified the need for a general purpose ‘local defence vessel’ capable of both anti-submarine and mine-warfare duties, while easy to construct and operate.[2][3] The vessel was initially envisaged as having a displacement of approximately 500 tons, a speed of at least 10 knots (19 km/h; 12 mph), and a range of 2,000 nautical miles (3,700 km; 2,300 mi)[4] The opportunity to build a prototype in the place of a cancelled Bar-class boom defence vessel saw the proposed design increased to a 680-ton vessel, with a 15.5 knots (28.7 km/h; 17.8 mph) top speed, and a range of 2,850 nautical miles (5,280 km; 3,280 mi), armed with a 4-inch gun, equipped with asdic, and able to fitted with either depth charges or minesweeping equipment depending on the planned operations: although closer in size to a sloop than a local defence vessel, the resulting increased capabilities were accepted due to advantages over British-designed mine warfare and anti-submarine vessels.[2][5] Construction of the prototype HMAS Kangaroo did not go ahead, but the plans were retained.[6] The need for locally built ‘all-rounder’ vessels at the start of World War II saw the “Australian Minesweepers” (designated as such to hide their anti-submarine capability, but popularly referred to as “corvettes”) approved in September 1939, with 60 constructed during the course of the war: 36 (including Echuca) ordered by the RAN, 20 ordered by the British Admiralty but manned and commissioned as RAN vessels, and 4 for the Royal Indian Navy.[2][7][8][9][1]
Echuca was laid down by HMA Naval Dockyard at Williamstown, Victoria on 22 February 1941.[1] She was launched on 17 January 1942 by Lady Royle, wife of First Naval Member Sir Guy Royle, and commissioned into the RAN on 7 September 1942.[1]
Operational history[edit]
World War II[edit]
Echuca’s initial role was as an anti-submarine patrol and convoy escort vessel along the eastern Australia coast and in New Guinea waters.[1] She stayed in this role from October 1942 until August 1944, when she was ordered to Darwin and attached to the United States Seventh Fleet‘s Survey Group.[1] She performed survey duties until the end of World War II, when she was refitted with minesweeping gear in Brisbane and assigned to the 20th Minesweeping Flotilla.[1] The Flotilla was responsible for clearing minefields set up in the waters of Australia, New Guinea, New Britain, and the Solomon Islands.[1]
Echuca received the battle honours “Pacific 1942–44” and “New Guinea 1943–44” for her wartime service.[10][11]
Echuca was paid off into Reserve in August 1946, but recommissioned in January 1947 for mine clearance work in the Great Barrier Reef.[1] The corvette performed this duty until August 1947, and in November 1947 towed the decommissioned corvette HMAS Inverell to Sydney.[1] Echuca was decommissioned again in Fremantle on 29 June 1948. At the end of April 1952, the corvette was sailed to Melbourne.[1]
RNZN service[edit]
On 5 March 1952, Echuca and three other Bathurst-class corvettes (HMA Ships Inverell, Kiama, and Stawell) were transferred to the Royal New Zealand Navy (RNZN).[12] She was commissioned into the RNZN in May 1952, and received the prefix HMNZS.[13]
The corvette remained in service with the RNZN until 1967, although from 1953 she was classified as being in reserve.[1][13] She was sold to Pacific Scrap Limited of Auckland for scrapping[1] on 11 April 1967
via WordPress https://ift.tt/E7lyDiX
JCs Royal New Zealand Navy Ships and New Zealand Defence 